When your Linde Electric ForkLift Truck Type 337-02 (LDC): E35, E40, E48 needs maintenance or repair，This service repair manual is great to have.

Becase it is the official highly detailed digital factory service repair manual. Manufacturers, professional technicians, and maintainers all over the world use this manual, which is the best option for anyone.

This QUALITY manual is 100 percents COMPLETE and INTACT,

This manual is INSTANT DOWNLOAD. You can save time and money by purchasing this manual, which you can browse on your electronic products, or print out for reference.

 

Models Covered:

E35
E40
E48

 

Manual Contents:

4.6 INTRODUCTION
4.6.1 PRINCIPLE OF THE FIELD EFFECT TRANSISTOR
4.6.1.1 CONTROL OF FIELD-EFFECT TRANSISTORS
4.6.1.2 TRANSISTOR MODULE TERMINALS
4.6.1.3 INSTALLATION OF THE TRANSISTOR MODULES
4.6.1.4 COMPACT POWER MODULES
4.6.1.5 TRACTION AND LIFT POWER MODULE
4.6.1.6 POWER MODULE TESTS (Traction module illustrated)
4.6.1.7 TEST CONDITIONS
4.6.1.8 TESTING IF POWER MODULE IS OFF
4.6.1.9 TESTING IF THE POWER MODULE IS ON
4.6.1.10 TESTING THE PROTECTIVE DIODE IN THE POWER MODULE
4.6.1.11 TESTING THE FREEWHEEL AND BRAKE DIODES IN THE POWER MODULE
4.6.1.12 TESTING THE REGENERATIVE CURRENT DIODE IN THE POWER MODULE.
4.6.1.13 INSTALLATION OF THE TRANSISTOR MODULES
4.6.2 TRACTION CIRCUIT
4.6.2.1 TRACTION CIRCUIT – FORWARD DIRECTION
4.6.2.2 TRACTION CIRCUIT – REVERSE DIRECTION
4.6.2.3 TRACTION CIRCUIT – FREEWHEEL
4.6.2.4 TRACTION CIRCUIT – REGENERATIVE BRAKING (STAGE 1)
4.6.2.5 TRACTION CIRCUIT – REGENERATIVE BRAKING (STAGE 2)
4.6.3 DIRECTION CONTACTOR
4.6.3.1 DIRECTION CONTACTOR – TIP REPLACEMENT
4.6.4 REGEN CONTACTOR
4.6.5 ELECTRONIC TRACTION CONTROL UNIT 1A1
4.6.5.1 OPTIONAL OUTPUT
4.6.5.2 SWITCH CONTROLLED SPEED RESTRICTION
4.6.5.3 TRACTION CONTROL MODULE CONNECTOR PIN DESIGNATIONS
4.6.5.4 TRACTION MODULE POWER SUPPLY
4.6.5.5 NEGATIVE TRACTION ENABLE
4.6.6 24 VOLT ELECTRONIC VOLTAGE REGULATOR
4.6.7 ALARM OPTION
4.6.7.1 OPERATION OF AUDIBLE ALARM (OPTION)
4.6.8 HANDBRAKE INTERLOCK.
4.6.9 TRACTION MOTOR TEMPERATURE INTERLOCKS AND WARNINGS
4.6.10 ACCELERATOR OPERATION
4.6.10.1 ACCELERATOR UNIT
4.6.10.2 SINGLE PEDAL OPERATION.
4.6.10.3 FORKS FORWARD DIRECTION SELECTED
4.6.10.4 FORKS TRAILING DIRECTION SELECTED
4.6.10.5 CHECKING OPERATION OF THE ACCELERATOR UNIT
4.6.11 CURRENT SENSOR
4.6.11.1 CURRENT SENSOR DESCRIPTION
4.6.11.2 CURRENT SENSOR OPERATION
4.6.11.3 FORMULA FOR CURRENT SENSOR CHECK
4.6.12 OPERATION AND SETUP OFF SPEED SENSOR (1B8)
4.6.12.1 TRACTION SPEED & DIRECTION SENSOR 1B8
4.6.12.2 CHECKING SENSOR WITHOUT LAPTOP OR LINDE TEST ADAPTOR
4.6.13 FIELD DIVERT
4.6.13.1 DIVERT REQUIREMENTS
4.6.13.2 FIELD DIVERT CONTACTOR PART
4.6.14 HYDRAULIC PULSE LTM
4.6.14.1 ELECTRONIC LIFT CONTROL
4.6.14.2 HYDRAULIC MODULE REMOVAL
4.6.14.3 HYDRAULIC MODULE REPLACEMENT
4.6.14.4 HYDRAULIC THERMAL SWITCH 2B11
4.6.14.5 HYDRAULIC MODULE PIN DESIGNATION
4.6.14.6 MODULE VOLTAGES TO AND FROM HYDRAULIC CONTROL POTENTIOMETER 2B1
4.6.14.7 HYDRAULIC CONTROL MODULE ADJUSTMENTS
4.6.15 BATTERY DISCHARGE INDICATOR & USE OF THE SERVICE TOOL
4.6.15.1 REPROGRAMMING THE COMBINATION INSTRUMENT WITH THE DIAGNOSIS UNIT
4.6.15.2 DIAGNOSTIC MODULE
4.6.15.3 COMBINED BATTERY DISCHARGE INDICATOR, HOUR METER, BRUSH WEAR, BRAKE FLUID LEVEL, MOTOR OVER-TEMPERATURE INDICATOR AND VEHICLE STATUS INDICATOR.
4.6.16 POWER STEERING
4.6.16.1 POWER STEERING CONTROL
4.6.16.2 POWER STEERING CONTROL
4.6.17 BRAKE WEAR INDICATOR 6A1 (OPTIONAL)
4.6.18 EARTH FAULTS
4.6.18.1 FITTING AUXILIARY ELECTRICAL EQUIPMENT
4.6.18.2 CABLE RUNS
4.6.18.3 INTERMITTENT FAULTS
4.6.18.4 CABLES
4.6.18.5 CABLES – INSPECTION
4.6.18.6 FAULT ANALYSIS
4.6.19 LIGHTING AND AUXILIARY 12 VOLT CIRCUITS CIRCUIT DIAGRAM
4.6.20 TRUCK DIAGNOSTICS
4.6.20.1 DIAGNOSIS WITH THE LINDE DIAGNOSIS MODULE
4.6.20.2 LINDE INTERFACE CONVERTER
4.6.20.3 INSTALLATION OF THE DIAGNOSIS SOFTWARE TEST & SETUP
4.6.20.4 FIRST TIME INSTALLATION INSTRUCTIONS
4.6.20.4.1 UPDATE INSTALLATION INSTRUCTIONS
4.6.20.5 STARTING AND SELECTING LINDE PROGRAM
4.6.20.6 STARTING THE DIAGNOSIS PROGRAM TEST & SETUP
4.6.20.7 LINDE DIAGNOSIS PROGRAM
4.6.20.8 HELP FUNCTION
4.6.20.9 TRACTION DIAGNOSTICS
4.6.20.10 INDEX TO TRACTION DIAGNOSTIC WINDOWS
4.6.20.11 INTERFACE:
4.6.20.12 INTERFACE CONVERTER STATUS:
4.6.21 WINDOWS
4.6.21.1 WINDOW 1 STATUS INFORMATION.
4.6.21.2 WINDOW 2 TEST DATA AND FAULT DIAGNOSIS
4.6.21.3 WINDOWS 3 AND 31 STORED FAULT DIAGNOSIS
4.6.21.3.1 WINDOW 32 DELETION OF STORED FAULT DIAGNOSIS (MASTER VERSION ONLY)
4.6.21.4 WINDOW 4 SWITCHING POSITION OF MICROSWITCHES
4.6.21.4.1 WINDOW 41 ADDITIONAL CONTROL SIGNALS (MASTER VERSION ONLY)
4.6.21.6 WINDOW 6 ANALOGUE CONTROL SIGNALS
4.6.21.6.1 WINDOW 61 INTERNAL CONTROL SIGNALS (MASTER VERSION ONLY)
4.6.21.6.2 WINDOW 62 INTERNAL CONTROL SIGNALS (MASTER VERSION ONLY)
4.6.21.7 WINDOW 7 ADJUSTING TRUCK PARAMETERS
4.6.21.7.1 WINDOW 71 SETTING TRUCK PARAMETERS FROM WINDOW 7 TO DEFAULT SETTINGS
4.6.21.7.2 WINDOW 72 DISPLAY OF PARAMETERS FROM SPECIAL VERSION
4.6.21.7.3 WINDOW 73 TRACTION DEFAULTS (SETS ADJUSTMENT IN PAGE 7 TO DEFAULT VALUES) (MASTER VERSION ONLY)
4.6.21.7.4 WINDOW 74 UPA PARAMETERS ONLY

And More………

 

============================
File Format: PDF
Compatible: All Versions of Windows & Mac ,Android
Language: English

 

 

Use this Linde Electric ForkLift Truck Type 337-02 (LDC): E35, E40, E48 service repair manual, Any owner could make the right decisions about how to maintain and repair their machine. We not only provide quality manuals, but we will also Provide excellent after-sales service, Customer Satisfaction Guaranteed!

Download link will also be sent to your email, Please make sure your email is typed correctly.

 

we offer free replenishment of any manual that we sold to you. If you lost or not found your manual, And any questions, please contact me.

support email: manualservicerepair@outlook.com

Thank you for coming and reading.